Selecting the right contractor with a multi-criteria decision-making approach. (Case study: Hamrah Awal Company)
Subject Areas : Special
Mohsen Chalajour
1
*
,
ghanbar abbaspur esfsdsn
2
1 - Master's degree graduate, Department of Information Technology Management, Faculty of Management, Islamic Azad University, South Tehran Branch,Tehran, Iran
2 - Assistant Professor, Department of Information Technology Management, Faculty of Management, Islamic Azad University, South Tehran Branch,Tehran, Iran
Keywords: Supply Chain, Outsourcing of Logistics Tasks, Best-Worst (BWM), Fuzzy TOPSIS, Fuzzy Cano.,
Abstract :
One of the areas of interest for mobile operators is base transceiver stations (BTS). As they are always looking to increase the number of BTSs to maintain and expand the capacity of their communication networks, Marm-e-Owl uses the contracting sector with an outsourcing approach to logistics tasks to improve the delivery and distribution performance of this equipment, which has a significant impact on speeding up the installation and commissioning of BTS stations. Contractors must have the necessary qualifications and qualifications, because if the activities are not carried out in a proper manner, irreparable damage will be done to the employer's reputation and position. Therefore, conducting this research is important, given the lack of relevant research resources in the country. Its goal is to identify the most important dimensions and indicators of contractor selection for the purpose of distributing base transceiver station (BTS) equipment, clustering and identifying mandatory indicators using the fuzzy Kano method, extracting the weights of the dimensions and mandatory indicators using the BWM method, and finally ranking contractors using the fuzzy TOPSIS method. According to the findings, the selection of contractors was based on three important dimensions and 12 mandatory indicators, of which the technical and executive performance criterion had the highest weight and the environmental criterion had the lowest weight. Among all the mandatory indicators, the contractor's mastery of modern warehousing had the highest weight and the environmental control and management index had the lowest weight
[1] سيد موسوي،سيدحسن ، (1398).همه چيز درباره دكل هاي مخابراتي /حقايق علمي ،واقعيت هاي پشت پرده و شايعه هاي مرتبط با سايت هاي BTS ، سايت اينترنتي فارس نيوز ،به آدرس http://fna.ir/dcho8h [2] كيان پور ،مهيار و ترابي ، سيد علي (1399)، ارزيابي و انتخاب پيمانكاران پروژه هاي عمراني شهرداري با در نظر گرفتن معيارهاي مهندسي مقاومت پذيري ، نشريه مطالعات كمي در مديريت . صفحات 70-45. [3] همايون فر،مهدي و گودرزوند چگيني ، مهرداد و دانشور ، امير (1397)، الويت بندي تامين كنندگان زنجيره تامين سبز با استفاده از رويكرد تركيبي MCDM فازي ، مجله تحقيق در عمليات در كاربردهاي آن .صفحات 41-61. [4] جلالی، امیرطه و احتشام راثی، رضا،1397،انتخاب تامین کنندگان پایدار در زنجیره تامین پوشاک با استفاده از روش بهترین- بدترین (BWM)،https://civilica.com/doc/933451. [5] اردوان، علی، عالم تبریز، اکبر، ربیعه، مسعود، و زندیه، مصطفی. (1397). انتخاب تأمین کنندگان پایدار با رویکرد تئوری خاکستری: مورد مطالعه صنعت فولاد. پژوهش های مهندسی صنایع در سیستم های تولید، 6(13 )، 165-177. SID. https://sid.ir/paper/241295/fa. [6] تقوایی سیچانی، هدیه، و اسماعیلیان، مجید. (1396). ارزیابی و رتبه بندی تامین کنندگان با استفاده از رویکردی ترکیبی از روش های کانو و TOPSIS در محیط فازی (مطالعه موردی شرکت داروسازی گلدارو). کنفرانس بین المللی مدیریت صنعتی. SID. https://sid.ir/paper/883307/fa [7] خواجه، مصطفی، امیری، مقصود، الفت، لعیا، و زندیه، مصطفی. (1399). ارزیابی و انتخاب تامین کنندگان پایدار در محیط فازی شهودی با رویکرد ترکیبی چندمعیاره بهترین بدترین و ویکور. تحقیق در عملیات در کاربردهای آن (ریاضیات کاربردی)، 17(1 (پیاپی 64) )، 25-48. https://sid.ir/paper/164687/fa . [8] Zimmer, K., Fröhling, M., Schultmann, F., 2016. Sustainable supplier management – a review of models supporting sustainable supplier selection, monitoring and development. International Journal of Production Research 54, 1412–1442. doi:10.1080/00207543.2015.1079340. [9] Govindan, K., Rajendran, S., Sarkis, J., Murugesan, P., 2015. Multi criteria decision making approaches for green supplier evaluation and selection: a literature review. Journal of Cleaner Production 98, 66–83. doi:10.1016/j.jclepro.2013.06.046. [10] Shaw, K., Shankar, R., Yadav, S.S., Thakur, L.S., 2012. Supplier selection using fuzzy AHP and fuzzy multi-objective linear programming for developing low carbon supply chain. Expert Systems with Applications 39, 8182–8192. doi:10.1016/j.eswa.2012.01.149. [11] Awasthi, A., Govindan, K., Gold, S., 2018. Multi-tier sustainable global supplier selection using a fuzzy AHP-VIKOR based approach. International Journal of Production Economics 195, 106–117. doi:10.1016/j.ijpe.2017.10.013. [12] Chen, Zhihua. .& ,etal., 2020. Sustainable supplier selection for smart supply chain considering internal and external uncertainty: An integrated rough-fuzzy approach. Applied Soft Computing Journal. https://doi.org/10.1016/j.asoc.2019.106004. [13] عيسايي ،حسين و بيطرف ، احمد . (1391)، رويكردهاي نوين لجستيك ، چاپ اول ، تهران ، موسسه چاپ و انتشارات دانشگاه جامع امام حسين (ع). صفحات 250-225. [14] زندحسامي ،حسام و ساوجي ،آوا. (1391)، مديريت ريسك در مديريت زنجيره تامين ، فصلنامه مديريت توسعه و تحول . صفحات 44-37. [15] رنگريز ، حسن . (1396)، تجزيه و تحليل و طراحي سيستم اطلاعات مديريت ،چاپ شانزدهم ،تهران،شركت چاپ و نشر بازرگاني . صفحات 113-109. [16] آذر،عادل و شريعتي راد ،مريم .(1391)،طرح ريزي و بهبود بسط عملكرد كيفيت (رويكرد مدل كانو فازي)،فصلنامه علمي -پژوهشي مطالعات مديريت صنعتي سال دهم ، شماره 27،صفحات 15-1. [17] Rezaei, J. (2015). Best-worst multi-criteria decision-making method. Omega, 53, 49-57. [18] عباس پور اسفدن ، قنبر . (1400)، كاربرد تئوري تصميم گيري در مديريت و مهندسي ( كلاسيك و فازي ) (بارويكرد پايان نامخه نويسي ) ،چاپ دوم ، تهران ، اساتيد برتر . صفحات 203-1.